cleaning up

9 files changed, 2 insertions, 973 deletions

diff --git a/bochs/bochsdebug b/bochs/bochsdebug
deleted file mode 100644
index fabafe9..0000000
--- a/bochs/bochsdebug
+++ /dev/null
@@ -1,2 +0,0 @@
-continue
-
diff --git a/bochs/bochsrc b/bochs/bochsrc
deleted file mode 100644
index 47a7d3f..0000000
--- a/bochs/bochsrc
+++ /dev/null
@@ -1,965 +0,0 @@
-#
-#
-#
-## You may now use double quotes around pathnames, in case
-# your pathname includes spaces.
-
-#=======================================================================
-# CONFIG_INTERFACE
-#
-# The configuration interface is a series of menus or dialog boxes that
-# allows you to change all the settings that control Bochs's behavior.
-# Depending on the platform there are up to 3 choices of configuration
-# interface: a text mode version called "textconfig" and two graphical versions
-# called "win32config" and "wx".  The text mode version uses stdin/stdout and
-# is always compiled in, unless Bochs is compiled for wx only. The choice
-# "win32config" is only available on win32 and it is the default there.
-# The choice "wx" is only available when you use "--with-wx" on the configure
-# command.  If you do not write a config_interface line, Bochs will
-# choose a default for you.
-#
-# NOTE: if you use the "wx" configuration interface, you must also use
-# the "wx" display library.
-#=======================================================================
-#config_interface: textconfig
-#config_interface: wx
-
-#=======================================================================
-# DISPLAY_LIBRARY
-#
-# The display library is the code that displays the Bochs VGA screen.  Bochs 
-# has a selection of about 10 different display library implementations for 
-# different platforms.  If you run configure with multiple --with-* options, 
-# the display_library command lets you choose which one you want to run with.
-# If you do not write a display_library line, Bochs will choose a default for
-# you.
-#
-# The choices are: 
-#   x              use X windows interface, cross platform
-#   sdl            use SDL library, cross platform
-#   svga           use SVGALIB library for Linux, allows graphics without X11
-#   term           text only, uses curses/ncurses library, cross platform
-#   rfb            provides an interface to AT&T's VNC viewer, cross platform
-#   wx             use wxWidgets library, cross platform
-#   nogui          no display at all
-#
-# NOTE: if you use the "wx" configuration interface, you must also use
-# the "wx" display library.
-#
-# Specific options:
-# Some display libraries now support specific option to control their
-# behaviour. See the examples below for currently supported options.
-#=======================================================================
-#display_library: rfb, options="timeout=60" # time to wait for client
-#display_library: sdl #, options="fullscreen" # startup in fullscreen mode
-#display_library: term
-#display_library: wx
-#display_library: x, options="hideIPS" # disable IPS output in status bar
-display_library: x, options="gui_debug" # use GTK debugger gui
-#display_library: term
-#display_library: x
-#
-
-#=======================================================================
-# ROMIMAGE:
-# The ROM BIOS controls what the PC does when it first powers on.
-# Normally, you can use a precompiled BIOS in the source or binary
-# distribution called BIOS-bochs-latest. The ROM BIOS is usually loaded
-# starting at address 0xf0000, and it is exactly 64k long. Another option
-# is 128k BIOS which is loaded at address 0xe0000.
-# You can also use the environment variable $BXSHARE to specify the
-# location of the BIOS.
-# The usage of external large BIOS images (up to 512k) at memory top is
-# now supported, but we still recommend to use the BIOS distributed with
-# Bochs. The start address optional, since it can be calculated from image size.
-#=======================================================================
-#romimage: file=/usr/share/bochs/BIOS-bochs-latest
-#romimage: file=bios/seabios-0.5.1.bin
-#romimage: file=mybios.bin, address=0xfff80000 # 512k at memory top
-#romimage: file=/home/miguel/opt/bochs-2.6.6/bios/BIOS-bochs-latest
-
-
-#=======================================================================
-# CPU:
-# This defines cpu-related parameters inside Bochs:
-#
-#  COUNT:
-#  Set the number of processors:cores per processor:threads per core 
-#  when Bochs is compiled for SMP emulation.
-#  Bochs currently supports up to 8 threads running simultaniosly. 
-#  If Bochs is compiled without SMP support, it won't accept values 
-#  different from 1.
-#
-#  QUANTUM:
-#  Maximum amount of instructions allowed to execute by processor before
-#  returning control to another cpu. This option exists only in Bochs 
-#  binary compiled with SMP support.
-#
-#  RESET_ON_TRIPLE_FAULT:
-#  Reset the CPU when triple fault occur (highly recommended) rather than
-#  PANIC. Remember that if you trying to continue after triple fault the 
-#  simulation will be completely bogus !
-#
-#  MSRS:
-#  Define path to user CPU Model Specific Registers (MSRs) specification.
-#  See example in msrs.def.
-#
-#  IGNORE_BAD_MSRS:
-#  Ignore MSR references that Bochs does not understand; print a warning
-#  message instead of generating #GP exception. This option is enabled
-#  by default but will not be avaiable if configurable MSRs are enabled.
-#
-#  IPS:
-#  Emulated Instructions Per Second. This is the number of IPS that bochs
-#  is capable of running on your machine. You can recompile Bochs with
-#  --enable-show-ips option enabled, to find your host's capability.
-#  Measured IPS value will then be logged into your log file or shown
-#  in the status bar (if supported by the gui).
-#
-#  IPS is used to calibrate many time-dependent events within the bochs 
-#  simulation.  For example, changing IPS affects the frequency of VGA
-#  updates, the duration of time before a key starts to autorepeat, and
-#  the measurement of BogoMips and other benchmarks.
-#
-#  Examples:
-#
-#  Bochs Machine/Compiler                                 Mips
-# ____________________________________________________________________
-#  2.3.7 3.2Ghz Intel Core 2 Q9770 with WinXP/g++ 3.4    50 to 55 Mips
-#  2.3.7 2.6Ghz Intel Core 2 Duo with WinXP/g++ 3.4      38 to 43 Mips
-#  2.2.6 2.6Ghz Intel Core 2 Duo with WinXP/g++ 3.4      21 to 25 Mips
-#  2.2.6 2.1Ghz Athlon XP with Linux 2.6/g++ 3.4         12 to 15 Mips
-#  2.0.1 1.6Ghz Intel P4 with Win2000/g++ 3.3             5 to  7 Mips
-#=======================================================================
-cpu: count=2 #, ips=1000000 #, reset_on_triple_fault=1, ignore_bad_msrs=1, msrs="msrs.def"
-
-#=======================================================================
-# CPUID:
-#
-# This defines features and functionality supported by Bochs emulated CPU:
-#
-#  MMX:
-#  Select MMX instruction set support.
-#  This option exists only if Bochs compiled with BX_CPU_LEVEL >= 5.
-#
-#  SEP:
-#  Select SYSENTER/SYSEXIT instruction set support.
-#  This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
-#
-#  SSE:
-#  Select SSE instruction set support.
-#  Any of NONE/SSE/SSE2/SSE3/SSSE3/SSE4_1/SSE4_2 could be selected.
-#  This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
-#
-#  XAPIC:
-#  Select XAPIC extensions support.
-#  This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
-#
-#  AES:
-#  Select AES instruction set support.
-#  This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
-#
-#  MOVBE:
-#  Select MOVBE Intel(R) Atom instruction support.
-#  This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
-#
-#  XSAVE:
-#  Select XSAVE extensions support.
-#  This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
-#
-#  1G_PAGES:
-#  Enable 1G page size support in long mode.
-#  This option exists only if Bochs compiled with x86-64 support.
-#
-#  PCID:
-#  Enable Process-Context Identifiers (PCID) support in long mode.
-#  This option exists only if Bochs compiled with x86-64 support.
-#
-#  FSGSBASE:
-#  Enable GS/GS BASE access instructions support in long mode.
-#  This option exists only if Bochs compiled with x86-64 support.
-#
-#  MWAIT:
-#  Select MONITOR/MWAIT instructions support.
-#  This option exists only if Bochs compiled with --enable-monitor-mwait.
-#
-#  MWAIT_IS_NOP:
-#  When this option is enabled MWAIT will not put the CPU into a sleep state.
-#  This option exists only if Bochs compiled with --enable-monitor-mwait.
-#
-#  VENDOR_STRING:
-#  Set the CPUID vendor string returned by CPUID(0x0). This should be a
-#  twelve-character ASCII string.  
-#
-#  BRAND_STRING:
-#  Set the CPUID vendor string returned by CPUID(0x80000002 .. 0x80000004).  
-#  This should be at most a forty-eight-character ASCII string.  
-#
-#  STEPPING:
-#  Set stepping information returned by CPUID. Default stepping value is 3.
-#
-#  CPUID_LIMIT_WINNT:
-#  Determine whether to limit maximum CPUID function to 3. This mode is
-#  required to workaround WinNT installation and boot issues.
-#=======================================================================
-#cpuid: mmx=1, sep=1, sse=sse4_2, xapic=1, aes=1, movbe=1, xsave=1
-#cpuid: stepping=5
-#cpuid: cpuid_limit_winnt=0
-#cpuid: mmx=1, sep=1, sse=sse4_2, xapic=1, aes=1, movbe=1, xsave=1
-
-#=======================================================================
-# MEMORY
-# Set the amount of physical memory you want to emulate.
-#
-# GUEST:
-# Set amount of guest physical memory to emulate. The default is 32MB,
-# the maximum amount limited only by physical address space limitations.
-#
-# HOST:
-# Set amount of host memory you want to allocate for guest RAM emulation.
-# It is possible to allocate less memory than you want to emulate in guest
-# system. This will fake guest to see the non-existing memory. Once guest
-# system touches new memory block it will be dynamically taken from the
-# memory pool. You will be warned (by FATAL PANIC) in case guest already
-# used all allocated host memory and wants more.
-#
-#=======================================================================
-memory: guest=128, host=1024
-
-#=======================================================================
-# OPTROMIMAGE[1-4]:
-# You may now load up to 4 optional ROM images. Be sure to use a 
-# read-only area, typically between C8000 and EFFFF. These optional
-# ROM images should not overwrite the rombios (located at
-# F0000-FFFFF) and the videobios (located at C0000-C7FFF).
-# Those ROM images will be initialized by the bios if they contain 
-# the right signature (0x55AA) and a valid checksum.
-# It can also be a convenient way to upload some arbitrary code/data
-# in the simulation, that can be retrieved by the boot loader
-#=======================================================================
-#optromimage1: file=optionalrom.bin, address=0xd0000
-#optromimage2: file=optionalrom.bin, address=0xd1000
-#optromimage3: file=optionalrom.bin, address=0xd2000
-#optromimage4: file=optionalrom.bin, address=0xd3000
-
-#optramimage1: file=FoolData.img, address=0x90000
-#optramimage2: file=/path/file2.img, address=0x0020000
-#optramimage3: file=/path/file3.img, address=0x0030000
-#optramimage4: file=/path/file4.img, address=0x0040000
-
-#=======================================================================
-# VGAROMIMAGE
-# You now need to load a VGA ROM BIOS into C0000.
-#=======================================================================
-#vgaromimage: file=/usr/share/vgabios/vgabios.bin
-#vgaromimage: file=/usr/share/vgabios/vgabios.qxl.bin
-#vgaromimage: file=/home/miguel/temp/vgabios-0.7a.bin 
-#vgaromimage: file=/home/miguel/temp/vgabios-0.7a.cirrus.bin 
-#
-#vgaromimage: file=/usr/share/vgabios/vgabios.qxl.bin
-#vgaromimage: file=/usr/share/vgabios/vgabios.debug.bin
-#vgaromimage: file=/usr/share/vgabios/vgabios.cirrus.bin
-#vgaromimage: file=/usr/share/bochs/VGABIOS-lgpl-latest
-#vgaromimage: file=/home/miguel/opt/bochs-2.6.6/bios/VGABIOS-lgpl-latest-cirrus
-
-#=======================================================================
-# VGA:
-# Here you can specify the display extension to be used. With the value
-# 'none' you can use standard VGA with no extension. Other supported
-# values are 'vbe' for Bochs VBE and 'cirrus' for Cirrus SVGA support.
-#=======================================================================
-#vga: extension=vbe
-#vga: extension=cirrus
-
-#=======================================================================
-# FLOPPYA:
-# Point this to pathname of floppy image file or device
-# This should be of a bootable floppy(image/device) if you're
-# booting from 'a' (or 'floppy').
-#
-# You can set the initial status of the media to 'ejected' or 'inserted'.
-#   floppya: 2_88=path, status=ejected    (2.88M 3.5"  media)
-#   floppya: 1_44=path, status=inserted   (1.44M 3.5"  media)
-#   floppya: 1_2=path, status=ejected     (1.2M  5.25" media)
-#   floppya: 720k=path, status=inserted   (720K  3.5"  media)
-#   floppya: 360k=path, status=inserted   (360K  5.25" media)
-#   floppya: 320k=path, status=inserted   (320K  5.25" media)
-#   floppya: 180k=path, status=inserted   (180K  5.25" media)
-#   floppya: 160k=path, status=inserted   (160K  5.25" media)
-#   floppya: image=path, status=inserted  (guess media type from image size)
-#   floppya: 1_44=vvfat:path, status=inserted  (use directory as VFAT media)
-#   floppya: type=1_44                    (1.44M 3.5" floppy drive, no media)
-#
-# The path should be the name of a disk image file.  On Unix, you can use a raw
-# device name such as /dev/fd0 on Linux.  On win32 platforms, use drive letters
-# such as a: or b: as the path.  The parameter 'image' works with image files
-# only. In that case the size must match one of the supported types.
-# The parameter 'type' can be used to enable the floppy drive without media
-# and status specified. Usually the drive type is set up based on the media type.
-# The optional parameter 'write_protected' can be used to control the media
-# write protect switch. By default it is turned off.
-#=======================================================================
-#floppya: 1_44=FoolOS.img, status=inserted
-#floppya: image=../1.44, status=inserted
-#floppya: 1_44=/dev/fd0H1440, status=inserted
-#floppya: 1_2=../1_2, status=inserted
-#floppya: 1_44=a:, status=inserted
-#floppya: 1_44=a.img, status=inserted, write_protected=1
-#floppya: 1_44=/dev/rfd0a, status=inserted
-
-#=======================================================================
-# FLOPPYB:
-# See FLOPPYA above for syntax
-#=======================================================================
-#floppyb: 1_44=b:, status=inserted
-#floppyb: 1_44=b.img, status=inserted
-
-#=======================================================================
-# ATA0, ATA1, ATA2, ATA3
-# ATA controller for hard disks and cdroms
-#
-# ata[0-3]: enabled=[0|1], ioaddr1=addr, ioaddr2=addr, irq=number
-# 
-# These options enables up to 4 ata channels. For each channel
-# the two base io addresses and the irq must be specified.
-# 
-# ata0 and ata1 are enabled by default with the values shown below
-#
-# Examples:
-#   ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
-#   ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
-#   ata2: enabled=1, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11
-#   ata3: enabled=1, ioaddr1=0x168, ioaddr2=0x360, irq=9
-#=======================================================================
-#ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
-#ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
-#ata2: enabled=0, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11
-#ata3: enabled=0, ioaddr1=0x168, ioaddr2=0x360, irq=9
-
-#=======================================================================
-# ATA[0-3]-MASTER, ATA[0-3]-SLAVE
-#
-# This defines the type and characteristics of all attached ata devices:
-#   type=       type of attached device [disk|cdrom] 
-#   mode=       only valid for disks [flat|concat|external|dll|sparse|vmware3]
-#   mode=       only valid for disks [undoable|growing|volatile|vvfat]
-#   path=       path of the image / directory
-#   cylinders=  only valid for disks
-#   heads=      only valid for disks
-#   spt=        only valid for disks
-#   status=     only valid for cdroms [inserted|ejected]
-#   biosdetect= type of biosdetection [none|auto], only for disks on ata0 [cmos]
-#   translation=type of translation of the bios, only for disks [none|lba|large|rechs|auto]
-#   model=      string returned by identify device command
-#   journal=    optional filename of the redolog for undoable, volatile and vvfat disks
-#
-# Point this at a hard disk image file, cdrom iso file, or physical cdrom
-# device.  To create a hard disk image, try running bximage.  It will help you
-# choose the size and then suggest a line that works with it.
-#
-# In UNIX it may be possible to use a raw device as a Bochs hard disk, 
-# but WE DON'T RECOMMEND IT.  In Windows there is no easy way.
-#
-# In windows, the drive letter + colon notation should be used for cdroms.
-# Depending on versions of windows and drivers, you may only be able to 
-# access the "first" cdrom in the system.  On MacOSX, use path="drive"
-# to access the physical drive.
-#
-# The path is mandatory for hard disks. Disk geometry autodetection works with
-# images created by bximage if CHS is set to 0/0/0 (cylinders are calculated
-# using  heads=16 and spt=63). For other hard disk images and modes the
-# cylinders, heads, and spt are mandatory. In all cases the disk size reported
-# from the image must be exactly C*H*S*512.
-#
-# Default values are:
-#   mode=flat, biosdetect=auto, translation=auto, model="Generic 1234"
-#
-# The biosdetect option has currently no effect on the bios
-#
-# Examples:
-   ata0-master: type=disk, mode=flat, path=disk.img #, cylinders=10, heads=4, spt=18
-#   ata0-master: type=disk, mode=flat, path=disk.img
-#   ata0-slave:  type=disk, mode=flat, path=20M.sample, cylinders=615, heads=4, spt=17
-#   ata1-master: type=disk, mode=flat, path=30M.sample, cylinders=615, heads=6, spt=17
-#   ata1-slave:  type=disk, mode=flat, path=46M.sample, cylinders=940, heads=6, spt=17
-#   ata2-master: type=disk, mode=flat, path=62M.sample, cylinders=940, heads=8, spt=17
-#   ata2-slave:  type=disk, mode=flat, path=112M.sample, cylinders=900, heads=15, spt=17
-#   ata3-master: type=disk, mode=flat, path=483M.sample, cylinders=1024, heads=15, spt=63
-#   ata3-slave:  type=cdrom, path=iso.sample, status=inserted
-#=======================================================================
-#ata0-master: type=disk, mode=flat, path="d.sample"
-#ata0-master: type=disk, mode=flat, path="$HOME/.bochs/guest.hd0", cylinders=#cylinders#, heads=16, spt=63
-#ata0-master: type=disk, mode=flat, path="c.img", cylinders=0 # autodetect
-#ata0-slave: type=disk, mode=vvfat, path=/bochs/images/vvfat, journal=vvfat.redolog
-#ata0-slave: type=cdrom, path=/dev/cdrom, status=inserted
-
-#=======================================================================
-# BOOT:
-# This defines the boot sequence. Now you can specify up to 3 boot drives,
-# which can be 'floppy', 'disk', 'cdrom' or 'network' (boot ROM).
-# Legacy 'a' and 'c' are also supported.
-# Examples:
-#   boot: floppy
-#   boot: cdrom, disk
-#   boot: network, disk
-#   boot: cdrom, floppy, disk
-#=======================================================================
-#boot: floppy
-boot: disk
-#boot: floppy
-
-#=======================================================================
-# CLOCK:
-# This defines the parameters of the clock inside Bochs:
-#
-#  SYNC:
-#  This defines the method how to synchronize the Bochs internal time
-#  with realtime. With the value 'none' the Bochs time relies on the IPS
-#  value and no host time synchronization is used. The 'slowdown' method
-#  sacrifices performance to preserve reproducibility while allowing host
-#  time correlation. The 'realtime' method sacrifices reproducibility to
-#  preserve performance and host-time correlation.
-#  It is possible to enable both synchronization methods.
-#
-#  TIME0:
-#  Specifies the start (boot) time of the virtual machine. Use a time 
-#  value as returned by the time(2) system call. If no time0 value is 
-#  set or if time0 equal to 1 (special case) or if time0 equal 'local', 
-#  the simulation will be started at the current local host time.
-#  If time0 equal to 2 (special case) or if time0 equal 'utc',
-#  the simulation will be started at the current utc time.
-#
-# Syntax:
-#  clock: sync=[none|slowdown|realtime|both], time0=[timeValue|local|utc]
-#
-# Example:
-#   clock: sync=none,     time0=local       # Now (localtime)
-#   clock: sync=slowdown, time0=315529200   # Tue Jan  1 00:00:00 1980
-#   clock: sync=none,     time0=631148400   # Mon Jan  1 00:00:00 1990
-#   clock: sync=realtime, time0=938581955   # Wed Sep 29 07:12:35 1999
-#   clock: sync=realtime, time0=946681200   # Sat Jan  1 00:00:00 2000
-#   clock: sync=none,     time0=1           # Now (localtime)
-#   clock: sync=none,     time0=utc         # Now (utc/gmt)
-# 
-# Default value are sync=none, time0=local
-#=======================================================================
-#clock: sync=realtime, time0=local
-
-
-#=======================================================================
-# FLOPPY_BOOTSIG_CHECK: disabled=[0|1]
-# Enables or disables the 0xaa55 signature check on boot floppies
-# Defaults to disabled=0
-# Examples:
-#   floppy_bootsig_check: disabled=0
-#   floppy_bootsig_check: disabled=1
-#=======================================================================
-#floppy_bootsig_check: disabled=0
-
-#=======================================================================
-# LOG:
-# Give the path of the log file you'd like Bochs debug and misc. verbiage
-# to be written to. If you don't use this option or set the filename to
-# '-' the output is written to the console. If you really don't want it,
-# make it "/dev/null" (Unix) or "nul" (win32). :^(
-#
-# Examples:
-#   log: ./bochs.out
-#   log: /dev/tty
-#=======================================================================
-#log: /dev/stdout
-#log: ./bochs.log
-
-#=======================================================================
-# LOGPREFIX:
-# This handles the format of the string prepended to each log line.
-# You may use those special tokens :
-#   %t : 11 decimal digits timer tick
-#   %i : 8 hexadecimal digits of cpu current eip (ignored in SMP configuration)
-#   %e : 1 character event type ('i'nfo, 'd'ebug, 'p'anic, 'e'rror)
-#   %d : 5 characters string of the device, between brackets
-# 
-# Default : %t%e%d
-# Examples:
-#   logprefix: %t-%e-@%i-%d
-#   logprefix: %i%e%d
-#=======================================================================
-#logprefix: %t%e%d
-
-#=======================================================================
-# LOG CONTROLS
-#
-# Bochs now has four severity levels for event logging.
-#   panic: cannot proceed.  If you choose to continue after a panic, 
-#          don't be surprised if you get strange behavior or crashes.
-#   error: something went wrong, but it is probably safe to continue the
-#          simulation.
-#   info: interesting or useful messages.
-#   debug: messages useful only when debugging the code.  This may
-#          spit out thousands per second.
-#
-# For events of each level, you can choose to crash, report, or ignore.
-# TODO: allow choice based on the facility: e.g. crash on panics from
-#       everything except the cdrom, and only report those.
-#
-# If you are experiencing many panics, it can be helpful to change
-# the panic action to report instead of fatal.  However, be aware
-# that anything executed after a panic is uncharted territory and can 
-# cause bochs to become unstable.  The panic is a "graceful exit," so
-# if you disable it you may get a spectacular disaster instead.
-#=======================================================================
-#panic: action=ask
-#error: action=report
-#info: action=report
-#debug: action=report
-#debug: action=report
-#pass: action=fatal
-
-#=======================================================================
-# DEBUGGER_LOG:
-# Give the path of the log file you'd like Bochs to log debugger output.
-# If you really don't want it, make it /dev/null or '-'. :^(
-#
-# Examples:
-#   debugger_log: ./debugger.out
-#=======================================================================
-#debugger_log: /dev/null
-#debugger_log: debugger.out
-#debugger_log: -
-
-#=======================================================================
-# COM1, COM2, COM3, COM4:
-# This defines a serial port (UART type 16550A). In the 'term' you can specify
-# a device to use as com1. This can be a real serial line, or a pty.  To use
-# a pty (under X/Unix), create two windows (xterms, usually).  One of them will
-# run bochs, and the other will act as com1. Find out the tty the com1
-# window using the `tty' command, and use that as the `dev' parameter.
-# Then do `sleep 1000000' in the com1 window to keep the shell from
-# messing with things, and run bochs in the other window.  Serial I/O to
-# com1 (port 0x3f8) will all go to the other window.
-# In socket* and pipe* (win32 only) modes Bochs becomes either socket/named pipe
-# client or server. In client mode it connects to an already running server (if
-# connection fails Bochs treats com port as not connected). In server mode it
-# opens socket/named pipe and waits until a client application connects to it
-# before starting simulation. This mode is useful for remote debugging (e.g.
-# with gdb's "target remote host:port" command or windbg's command line option
-# -k com:pipe,port=\\.\pipe\pipename). Note: 'socket' is a shorthand for
-# 'socket-client' and 'pipe' for 'pipe-client'. Socket modes use simple TCP
-# communication, pipe modes use duplex byte mode pipes.
-# Other serial modes are 'null' (no input/output), 'file' (output to a file
-# specified as the 'dev' parameter), 'raw' (use the real serial port - under
-# construction for win32), 'mouse' (standard serial mouse - requires
-# mouse option setting 'type=serial', 'type=serial_wheel' or 'type=serial_msys').
-#
-# Examples:
-#   com1: enabled=1, mode=null
-#   com1: enabled=1, mode=mouse
-#   com2: enabled=1, mode=file, dev=serial.out
-#   com3: enabled=1, mode=raw, dev=com1
-#   com3: enabled=1, mode=socket-client, dev=localhost:8888
-#   com3: enabled=1, mode=socket-server, dev=localhost:8888
-#   com4: enabled=1, mode=pipe-client, dev=\\.\pipe\mypipe
-#   com4: enabled=1, mode=pipe-server, dev=\\.\pipe\mypipe
-#=======================================================================
-# com1: enabled=1, mode=term, dev=/dev/ttyS0
-
-
-#=======================================================================
-# PARPORT1, PARPORT2:
-# This defines a parallel (printer) port. When turned on and an output file is
-# defined the emulated printer port sends characters printed by the guest OS
-# into the output file. On some platforms a device filename can be used to
-# send the data to the real parallel port (e.g. "/dev/lp0" on Linux, "lpt1" on
-# win32 platforms).
-#
-# Examples:
-#   parport1: enabled=1, file="parport.out"
-#   parport2: enabled=1, file="/dev/lp0"
-#   parport1: enabled=0
-#=======================================================================
-# parport1: enabled=1, file="/dev/lp0"
-
-#=======================================================================
-# SB16:
-# This defines the SB16 sound emulation. It can have several of the
-# following properties.
-# All properties are in the format sb16: property=value
-# midi: The filename is where the midi data is sent. This can be a
-#       device or just a file if you want to record the midi data.
-# midimode:
-#      0=no data
-#      1=output to device (system dependent. midi denotes the device driver)
-#      2=SMF file output, including headers
-#      3=output the midi data stream to the file (no midi headers and no
-#        delta times, just command and data bytes)
-# wave: This is the device/file where wave output is stored
-# wavemode:
-#      0=no data
-#      1=output to device (system dependent. wave denotes the device driver)
-#      2=VOC file output, incl. headers
-#      3=output the raw wave stream to the file
-# log:  The file to write the sb16 emulator messages to.
-# loglevel:
-#      0=no log
-#      1=resource changes, midi program and bank changes
-#      2=severe errors
-#      3=all errors
-#      4=all errors plus all port accesses
-#      5=all errors and port accesses plus a lot of extra info
-# dmatimer:
-#      microseconds per second for a DMA cycle.  Make it smaller to fix
-#      non-continuous sound.  750000 is usually a good value.  This needs a
-#      reasonably correct setting for the IPS parameter of the CPU option.
-#
-# Examples for output devices:
-#   sb16: midimode=1, midi="", wavemode=1, wave=""           # win32
-#   sb16: midimode=1, midi=alsa:128:0, wavemode=1, wave=alsa # Linux with ALSA
-#=======================================================================
-#sb16: midimode=1, midi=/dev/midi00, wavemode=1, wave=/dev/dsp, loglevel=2, log=/dev/stdout, dmatimer=600000
-
-#=======================================================================
-# VGA_UPDATE_INTERVAL:
-# Video memory is scanned for updates and screen updated every so many
-# virtual seconds.  The default is 50000, about 20Hz. Keep in mind that
-# you must tweak the 'cpu: ips=N' directive to be as close to the number
-# of emulated instructions-per-second your workstation can do, for this
-# to be accurate.
-#
-# Examples:
-#   vga_update_interval: 250000
-#=======================================================================
-#vga_update_interval: 300000
-#vga_update_interval: 40000
-
-# using for Winstone '98 tests
-#vga_update_interval:  100000
-
-#=======================================================================
-# KEYBOARD_SERIAL_DELAY:
-# Approximate time in microseconds that it takes one character to
-# be transfered from the keyboard to controller over the serial path.
-# Examples:
-#   keyboard_serial_delay: 200
-#=======================================================================
-#keyboard_serial_delay: 250
-
-#=======================================================================
-# KEYBOARD_PASTE_DELAY:
-# Approximate time in microseconds between attempts to paste
-# characters to the keyboard controller. This leaves time for the
-# guest os to deal with the flow of characters.  The ideal setting
-# depends on how your operating system processes characters.  The
-# default of 100000 usec (.1 seconds) was chosen because it works 
-# consistently in Windows.
-#
-# If your OS is losing characters during a paste, increase the paste
-# delay until it stops losing characters.
-#
-# Examples:
-#   keyboard_paste_delay: 100000
-#=======================================================================
-#keyboard_paste_delay: 100000
-
-#=======================================================================
-# MOUSE:
-# This defines parameters for the emulated mouse type, the initial status
-# of the mouse capture and the runtime method to toggle it.
-#
-#  TYPE:
-#  With the mouse type option you can select the type of mouse to emulate.
-#  The default value is 'ps2'. The other choices are 'imps2' (wheel mouse
-#  on PS/2), 'serial', 'serial_wheel' and 'serial_msys' (one com port requires
-#  setting 'mode=mouse'). To connect a mouse to an USB port, see the 'usb_uhci'
-#  or 'usb_ohci' option (requires PCI and USB support).
-#
-#  ENABLED:
-#  The Bochs gui creates mouse "events" unless the 'enabled' option is
-#  set to 0. The hardware emulation itself is not disabled by this.
-#  Unless you have a particular reason for enabling the mouse by default,
-#  it is recommended that you leave it off. You can also toggle the mouse
-#  usage at runtime (RFB, SDL, Win32, wxWidgets and X11 - see below).
-#
-#  TOGGLE:
-#  The default method to toggle the mouse capture at runtime is to press the
-#  CTRL key and the middle mouse button ('ctrl+mbutton'). This option allows
-#  to change the method to 'ctrl+f10' (like DOSBox), 'ctrl+alt' (like QEMU)
-#  or 'f12' (replaces win32 'legacyF12' option).
-#
-# Examples:
-#   mouse: enabled=1
-#   mouse: type=imps2, enabled=1
-#   mouse: type=serial, enabled=1
-#   mouse: enabled=0, toggle=ctrl+f10
-#=======================================================================
-#mouse: enabled=1
-
-#=======================================================================
-# private_colormap: Request that the GUI create and use it's own
-#                   non-shared colormap.  This colormap will be used
-#                   when in the bochs window.  If not enabled, a
-#                   shared colormap scheme may be used.  Not implemented
-#                   on all GUI's.
-#
-# Examples:
-#   private_colormap: enabled=1
-#   private_colormap: enabled=0
-#=======================================================================
-#private_colormap: enabled=0
-
-#=======================================================================
-# ne2k: NE2000 compatible ethernet adapter
-#
-# Examples:
-# ne2k: ioaddr=IOADDR, irq=IRQ, mac=MACADDR, ethmod=MODULE, ethdev=DEVICE, script=SCRIPT
-#
-# ioaddr, irq: You probably won't need to change ioaddr and irq, unless there
-# are IRQ conflicts. These arguments are ignored when assign the ne2k to a
-# PCI slot.
-#
-# mac: The MAC address MUST NOT match the address of any machine on the net.
-# Also, the first byte must be an even number (bit 0 set means a multicast
-# address), and you cannot use ff:ff:ff:ff:ff:ff because that's the broadcast
-# address.  For the ethertap module, you must use fe:fd:00:00:00:01.  There may
-# be other restrictions too.  To be safe, just use the b0:c4... address.
-#
-# ethdev: The ethdev value is the name of the network interface on your host
-# platform.  On UNIX machines, you can get the name by running ifconfig.  On
-# Windows machines, you must run niclist to get the name of the ethdev.
-# Niclist source code is in misc/niclist.c and it is included in Windows 
-# binary releases.
-#
-# script: The script value is optional, and is the name of a script that 
-# is executed after bochs initialize the network interface. You can use 
-# this script to configure this network interface, or enable masquerading.
-# This is mainly useful for the tun/tap devices that only exist during
-# Bochs execution. The network interface name is supplied to the script
-# as first parameter
-#
-# If you don't want to make connections to any physical networks,
-# you can use the following 'ethmod's to simulate a virtual network.
-#   null: All packets are discarded, but logged to a few files.
-#   arpback: ARP is simulated. Disabled by default.
-#   vde:  Virtual Distributed Ethernet
-#   vnet: ARP, ICMP-echo(ping), DHCP and read/write TFTP are simulated.
-#         The virtual host uses 192.168.10.1.
-#         DHCP assigns 192.168.10.2 to the guest.
-#         TFTP uses the ethdev value for the root directory and doesn't
-#         overwrite files.
-#
-#=======================================================================
-# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:00, ethmod=linux, ethdev=eth0
-# ne2k: ioaddr=0x300, irq=9, mac=fe:fd:00:00:00:01, ethmod=tap, ethdev=tap0
-# ne2k: ioaddr=0x300, irq=9, mac=fe:fd:00:00:00:01, ethmod=tuntap, ethdev=/dev/net/tun0, script=./tunconfig
-# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=null, ethdev=eth0
-# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=vde, ethdev="/tmp/vde.ctl"
-# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=vnet, ethdev="c:/temp"
-
-#=======================================================================
-# pnic: Bochs/Etherboot pseudo-NIC
-#
-# Example:
-# pnic: enabled=1, mac=MACADDR, ethmod=MODULE, ethdev=DEVICE, script=SCRIPT
-#
-# The pseudo-NIC accepts the same syntax (for mac, ethmod, ethdev, script) and
-# supports the same networking modules as the NE2000 adapter. In addition to
-# this, it must be assigned to a PCI slot.
-#=======================================================================
-#pnic: enabled=1, mac=b0:c4:20:00:00:00, ethmod=vnet
-
-#=======================================================================
-# KEYBOARD_MAPPING:
-# This enables a remap of a physical localized keyboard to a 
-# virtualized us keyboard, as the PC architecture expects.
-# If enabled, the keymap file must be specified.
-# 
-# Examples:
-#   keyboard_mapping: enabled=1, map=gui/keymaps/x11-pc-de.map
-#=======================================================================
-#keyboard_mapping: enabled=0, map=/usr/share/bochs/keymaps/x11-pc-de.map
-
-#=======================================================================
-# KEYBOARD_TYPE:
-# Type of keyboard return by a "identify keyboard" command to the
-# keyboard controler. It must be one of "xt", "at" or "mf".
-# Defaults to "mf". It should be ok for almost everybody. A known
-# exception is french macs, that do have a "at"-like keyboard.
-#
-# Examples:
-#   keyboard_type: mf
-#=======================================================================
-#keyboard_type: mf
-
-#=======================================================================
-# USER_SHORTCUT:
-# This defines the keyboard shortcut to be sent when you press the "user"
-# button in the headerbar. The shortcut string is a combination of maximum
-# 3 key names (listed below) separated with a '-' character.
-# Valid key names:
-# "alt", "bksl", "bksp", "ctrl", "del", "down", "end", "enter", "esc",
-# "f1", ... "f12", "home", "ins", "left", "menu", "minus", "pgdwn", "pgup",
-# "plus", "right", "shift", "space", "tab", "up", "win", "print" and "power".
-#
-# Example:
-#   user_shortcut: keys=ctrl-alt-del
-#=======================================================================
-#user_shortcut: keys=ctrl-alt-del
-
-#=======================================================================
-# I440FXSUPPORT:
-# This option controls the presence of the i440FX PCI chipset. You can
-# also specify the devices connected to PCI slots. Up to 5 slots are
-# available now. These devices are currently supported: ne2k, pcivga,
-# pcidev, pcipnic and usb_ohci. If Bochs is compiled with Cirrus SVGA
-# support you'll have the additional choice 'cirrus'.
-#
-# Example:
-#   i440fxsupport: enabled=1, slot1=pcivga, slot2=ne2k
-#=======================================================================
-#i440fxsupport: enabled=1
-
-#=======================================================================
-# USB_UHCI:
-# This option controls the presence of the USB root hub which is a part
-# of the i440FX PCI chipset. With the portX parameter you can connect devices
-# to the hub (currently supported: 'mouse', 'tablet', 'keypad', 'disk', 'cdrom'
-# 'hub' and 'printer').
-#
-# The optionsX parameter can be used to assign specific options to the device
-# connected to the corresponding USB port. Currently this feature is only used
-# to set the speed reported by device and by the 'disk' device to specify
-# an alternative redolog file of some image modes.
-#
-# If you connect the mouse or tablet to one of the ports, Bochs forwards the
-# mouse movement data to the USB device instead of the selected mouse type.
-# When connecting the keypad to one of the ports, Bochs forwards the input of
-# the numeric keypad to the USB device instead of the PS/2 keyboard.
-#
-# To connect a 'flat' mode image as an USB hardisk you can use the 'disk' device
-# with the path to the image separated with a colon. To use other disk image modes
-# similar to ATA disks the syntax 'disk:mode:filename' must be used (see below).
-#
-# To emulate an USB cdrom you can use the 'cdrom' device name and the path to
-# an ISO image or raw device name also separated with a colon. An option to
-# insert/eject media is available in the runtime configuration.
-#
-# The device name 'hub' connects an external hub with max. 8 ports (default: 4)
-# to the root hub. To specify the number of ports you have to add the value
-# separated with a colon. Connecting devices to the external hub ports is only
-# available in the runtime configuration.
-#
-# The device 'printer' emulates the HP Deskjet 920C printer. The PCL data is
-# sent to a file specified in bochsrc.txt. The current code appends the PCL
-# code to the file if the file already existed. It would probably be nice to
-# overwrite the file instead, asking user first.
-#=======================================================================
-#usb_uhci: enabled=1
-#usb_uhci: enabled=1, port1=mouse, port2=disk:usbstick.img
-#usb_uhci: enabled=1, port1=hub:7, port2=disk:growing:usbdisk.img
-#usb_uhci: enabled=1, port2=disk:undoable:usbdisk.img, options1=journal:redo.log
-#usb_uhci: enabled=1, port1=printer:printdata.bin, port2=cdrom:image.iso
-
-#=======================================================================
-# USB_OHCI:
-# This option controls the presence of the USB OHCI host controller with a
-# 2-port hub. The portX option accepts the same device types with the same
-# syntax as the UHCI controller (see above). The OHCI HC must be assigned to
-# a PCI slot.
-#=======================================================================
-#usb_ohci: enabled=1
-#usb_ohci: enabled=1, port1=printer:usbprinter.bin
-
-#=======================================================================
-# CMOSIMAGE:
-# This defines image file that can be loaded into the CMOS RAM at startup.
-# The rtc_init parameter controls whether initialize the RTC with values stored
-# in the image. By default the time0 argument given to the clock option is used.
-# With 'rtc_init=image' the image is the source for the initial time.
-#
-# Example:
-#   cmosimage: file=cmos.img, rtc_init=image
-#=======================================================================
-#cmosimage: file=cmos.img, rtc_init=time0
-
-#=======================================================================
-# MAGIC_BREAK:
-# This enables the "magic breakpoint" feature when using the debugger.
-# The useless cpu instruction XCHG BX, BX causes Bochs to enter the
-# debugger mode. This might be useful for software development.
-#
-# Example:
-#   magic_break: enabled=1
-#=======================================================================
-#magic_break: enabled=1
-
-#=======================================================================
-# PORT_E9_HACK:
-# The 0xE9 port doesn't exists in normal ISA architecture. However, we
-# define a convention here, to display on the console of the system running
-# Bochs anything that is written to it. The idea is to provide debug output
-# very early when writing BIOS or OS code for example, without having to
-# bother with setting up a serial port or etc. Reading from port 0xE9 will
-# will return 0xe9 to let you know if the feature is available.
-# Leave this 0 unless you have a reason to use it.
-#
-# Example:
-#   port_e9_hack: enabled=1
-#=======================================================================
-#port_e9_hack: enabled=1
-
-#=======================================================================
-# DEBUG_SYMBOLS:
-# This loads symbols from the specified file for use in Bochs' internal
-# debugger. Symbols are loaded into global context. This is equivalent to
-# issuing ldsym debugger command at start up.
-#
-# Example:
-#   debug_symbols: file="kernel.sym"
-#   debug_symbols: file="kernel.sym", offset=0x80000000
-#=======================================================================
-#debug_symbols: file="kernel.sym"
-
-#=======================================================================
-# other stuff
-#=======================================================================
-#load32bitOSImage: os=nullkernel, path=../kernel.img, iolog=../vga_io.log
-#load32bitOSImage: os=linux, path=../linux.img, iolog=../vga_io.log, initrd=../initrd.img
-#text_snapshot_check: enabled=1
-#print_timestamps: enabled=1
-
-#-------------------------
-# PCI host device mapping
-#-------------------------
-#pcidev: vendor=0x1234, device=0x5678
-
-#=======================================================================
-# GDBSTUB:
-# Enable GDB stub. See user documentation for details.
-# Default value is enabled=0.
-#=======================================================================
-#gdbstub: enabled=0, port=1234, text_base=0, data_base=0, bss_base=0
-
-#=======================================================================
-# PLUGIN_CTRL:
-# Controls the presence of optional plugins without a separate option.
-# By default all existing plugins are enabled. These plugins are currently
-# supported: 'acpi', 'biosdev', 'extfpuirq', 'gameport', 'iodebug',
-# 'pci_ide', 'speaker' and 'unmapped'.
-#=======================================================================
-#plugin_ctrl: biosdev=0, speaker=0
-
-#=======================================================================
-# USER_PLUGIN:
-# Load user-defined plugin. This option is available only if Bochs is
-# compiled with plugin support. Maximum 8 different plugins are supported.
-# See the example in the Bochs sources how to write a plugin device.
-#=======================================================================
-#user_plugin: name=testdev
-#
-#
-#
-##
-#pci: enabled=1, chipset=i440fx, slot1=cirrus
-#i440fxsupport: enabled=1, slot1=cirrus
-#e1000: enabled=1, mac=52:54:00:12:34:56 #, ethmod=slirp, script=slirp.conf
-
-
diff --git a/lib/logger/log.c b/lib/logger/log.c
index 63e9558..3b175c0 100644
--- a/lib/logger/log.c
+++ b/lib/logger/log.c
@@ -12,10 +12,6 @@
 
 static void log_string(char *str)
 {
-//	if(get_max_fd()<2)return;
-//	syscall_write(2,str,strlen(str));
-
-	// TODO: use FD abstraction!
 	while(*str!=0)
 	{
 	    serial_write(*str++);
@@ -54,10 +50,10 @@ void panic(char *module_name,  char *message)
 {
     char buf_log[256];
     tfp_sprintf(buf_log,"\033[41;37m\n !! KERNEL PANIC !! %s: %s\n\n",module_name,message);
-//    log_string(buf_log);
+
     //PANIC DIRECTLY TO STDOUT//
-    log_string(buf_log);
     syscall_write(1,buf_log,strlen(buf_log));
+    log_string(buf_log);
 
     while(1)
     {
diff --git a/packages/ncurses-5.9/README b/xxx/packages/ncurses-5.9/README
index 78b9cd4..78b9cd4 100644
--- a/packages/ncurses-5.9/README
+++ b/xxx/packages/ncurses-5.9/README
diff --git a/packages/ncurses-5.9/README_examples b/xxx/packages/ncurses-5.9/README_examples
index 18fe3cb..18fe3cb 100644
--- a/packages/ncurses-5.9/README_examples
+++ b/xxx/packages/ncurses-5.9/README_examples
diff --git a/packages/ncurses-5.9/config.sub b/xxx/packages/ncurses-5.9/config.sub
index dec4216..dec4216 100644
--- a/packages/ncurses-5.9/config.sub
+++ b/xxx/packages/ncurses-5.9/config.sub
diff --git a/packages/ncurses-5.9/foolterm.ti b/xxx/packages/ncurses-5.9/foolterm.ti
index ea60e0e..ea60e0e 100644
--- a/packages/ncurses-5.9/foolterm.ti
+++ b/xxx/packages/ncurses-5.9/foolterm.ti
diff --git a/packages/ncurses-5.9/ncurses-5.9-foolos.patch b/xxx/packages/ncurses-5.9/ncurses-5.9-foolos.patch
index 6296f0b..6296f0b 100644
--- a/packages/ncurses-5.9/ncurses-5.9-foolos.patch
+++ b/xxx/packages/ncurses-5.9/ncurses-5.9-foolos.patch
diff --git a/packages/ncurses-5.9/termios.h b/xxx/packages/ncurses-5.9/termios.h
index 98ae1b7..98ae1b7 100644
--- a/packages/ncurses-5.9/termios.h
+++ b/xxx/packages/ncurses-5.9/termios.h