1 files changed, 143 insertions, 0 deletions
diff --git a/nix/nixops/aquarius/configuration.nix b/nix/nixops/aquarius/configuration.nix
new file mode 100644
index 0000000..5034026
--- /dev/null
+++ b/nix/nixops/aquarius/configuration.nix
@@ -0,0 +1,143 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+
+{ config, pkgs, ... }:
+
+let
+    my_ssh_pub_key = "ssh-rsa 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 Miguel_User@DESKTOP-4NH8M69";
+    myNixCabal = import ~/nix/cabal/default.nix;
+in
+{
+  imports = [ ./hardware-configuration.nix ];
+
+  environment.systemPackages = [ myNixCabal ];
+
+  # Use the GRUB 2 boot loader.
+  boot.loader.grub.enable = true;
+  boot.loader.grub.version = 2;
+  # boot.loader.grub.efiSupport = true;
+  # boot.loader.grub.efiInstallAsRemovable = true;
+  # boot.loader.efi.efiSysMountPoint = "/boot/efi";
+  # Define on which hard drive you want to install Grub.
+  boot.loader.grub.device = "/dev/sda"; # or "nodev" for efi only
+
+  # USERS / GROUPS / SSH
+  services.openssh = {
+	enable = true;
+	permitRootLogin = "prohibit-password";
+  	passwordAuthentication = false;
+  };
+
+  users.mutableUsers = false;
+
+  users.users.miguel = {
+	isNormalUser = true;
+	home = "/home/miguel";
+	description = "Miguel";
+	extraGroups = [ "wheel" ];
+  	openssh.authorizedKeys.keys = [ my_ssh_pub_key ];
+	uid = 1000;
+  };  
+
+  security.sudo.wheelNeedsPassword = false;
+
+  users.extraUsers.root.openssh.authorizedKeys.keys = [ my_ssh_pub_key ];
+
+
+  # networking.hostName = "nixos"; # Define your hostname.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+
+  # Set your time zone.
+  # time.timeZone = "Europe/Amsterdam";
+
+  # The global useDHCP flag is deprecated, therefore explicitly set to false here.
+  # Per-interface useDHCP will be mandatory in the future, so this generated config
+  # replicates the default behaviour.
+  networking.useDHCP = false;
+  networking.interfaces.ens3.useDHCP = false;
+  networking.interfaces.ens3.ipv6.addresses = [ { "address"      = "2a01:4f8:121:4322::4";
+                                                  "prefixLength" = 64;
+                                                }
+                                              ];
+  networking.defaultGateway6 = { address = "fe80::1"; interface = "ens3"; };
+
+  networking.interfaces.ens6.useDHCP = true;
+
+
+services.nginx = {
+  enable = true;
+  };
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Select internationalisation properties.
+  # i18n.defaultLocale = "en_US.UTF-8";
+  # console = {
+  #   font = "Lat2-Terminus16";
+  #   keyMap = "us";
+  # };
+
+  # Enable the X11 windowing system.
+  # services.xserver.enable = true;
+
+
+  
+
+  # Configure keymap in X11
+  # services.xserver.layout = "us";
+  # services.xserver.xkbOptions = "eurosign:e";
+
+  # Enable CUPS to print documents.
+  # services.printing.enable = true;
+
+  # Enable sound.
+  # sound.enable = true;
+  # hardware.pulseaudio.enable = true;
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.xserver.libinput.enable = true;
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  # users.users.jane = {
+  #   isNormalUser = true;
+  #   extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
+  # };
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  # environment.systemPackages = with pkgs; [
+  #   vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+  #   wget
+  #   firefox
+  # ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+  networking.firewall.enable = true;
+  networking.firewall.allowedTCPPorts = [ 80 443 ];
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "21.05"; # Did you read the comment?
+
+}
+