big renaming

1 files changed, 0 insertions, 100 deletions

diff --git a/asm/x86.h b/asm/x86.h
deleted file mode 100644
index 8e6a741..0000000
--- a/asm/x86.h
+++ /dev/null
@@ -1,100 +0,0 @@
-#ifndef FOOLOS_X86_H
-#define FOOLOS_X86_H
-
-/**
- * @file
- *
- * X86 32-bit Basics
- * =================
- *
- * **All the functions are very specific to the targeted x86 architecture.**
- *
- * This is the header of our basic **x86** function definitions.
- * Most of the functions are implemented in assembler in the file _asm/x86.s_,
- * however a few short helper functions are defined in this header itself:
- *
- * * x86_set_page_directory()
- * * x86_paging_enable()
- * * x86_paging_disable()
- *
- *
- * Reading and Writing Ports
- * -------------------------
- *
- * The functions of the form x86_outX() and x86_inX(), where the X 
- * indicates the value size allow reading and writing ports.
- *
- * * x86_outb() / x86_inb()
- * * x86_outw() / x86_inw()
- * * x86_outl() / x86_inl()
- *
- * The sizes are:
- *
- * * b - byte (8 bit)
- * * w - word (16 bit)
- * * l - double word (32 bit)
- *
- * Remember, that the port address is always 32 bits wide.
- *
- * Dependencies
- * ------------
- *
- * All we need are uint32_t, uint16_t and uint8_t as provided by <stdint.h>
- *
- * References
- * ----------
- * * http://wiki.osdev.org/Interrupt_Service_Routines
- * * https://wiki.osdev.org/CPU_Registers_x86
- * * ...
- *
- */
-
-// we need uint32_t, uint16_t, uint8_t //
-#include <stdint.h>
-
-/** write byte to port */
-void     x86_outb (uint32_t port, uint8_t data);
-
-/** read byte from port */
-uint8_t  x86_inb  (uint32_t port);
-
-/** write word to port */
-void     x86_outw (uint32_t port, uint16_t data);
-
-/** read word from port */
-uint16_t x86_inw  (uint32_t port);
-
-/** write double word to port */
-void     x86_outl (uint32_t port, uint32_t data);
-
-/** read double word from port */
-uint32_t x86_inl  (uint32_t port);
-
-/** disable interrupts */
-void     x86_cli  ();
-
-/** enable interrupts */
-void     x86_sti  ();
-
-/** xchg - this can be used for semaphors and simlar */
-uint8_t  x86_xchg (uint8_t *addr, uint8_t val);
-
-/** invlpg - invalidate translation lookaside buffer */
-void     x86_invlpg(uint32_t addr);
-
-/** read value from control register specified by num */
-uint32_t x86_get_cr(uint8_t num);
-
-/** write given value to the control register specified by num */
-void     x86_set_cr(uint8_t num, uint32_t value);
-
-/** Set the address of the page directory. This is required **before** enabling paging */
-static inline void x86_set_page_directory(uint32_t pdir_addr) {x86_set_cr(3,pdir_addr);}
-
-/** Enable paging */
-static inline void x86_paging_enable()    {x86_set_cr(0,x86_get_cr(0)| 0x80000000);}
-
-/** Disable paging */
-static inline void x86_paging_disable()   {x86_set_cr(0,x86_get_cr(0)&~0x80000000);}
-
-#endif